GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Cadillac
🢒
2007
🢒
Escalade ESV
🢒
Driveline/Axle
🢒
Front Drive Axle
🢒 Vent Hose Replacement
Vent Hose Replacement 9.25 Inch Axle
Removal Procedure
Raise the vehicle. Refer to
Lifting and Jacking the Vehicle
.
Remove the front differential carrier shield, if equipped. Refer to
Shield Replacement
.
Important:
Make note of the routing in order to aid in reassembly.
Remove the vent hose (1) from the wiring bundle (2), S4WD axles only.
Remove the vent hose from the retainer clips, all axles.
Remove the vent hose from the differential carrier assembly.
Remove the vent hose from the vehicle.
Installation Procedure
Install the vent hose to the vehicle.
•
Route the vent hose the same way as when removed.
•
Ensure the hose is free of kinks and routes clear of sharp components.
•
Ensure the vent hose is not plugged.
Connect the vent hose to the differential carrier assembly.
Install the vent hose (1) to the wiring bundle (2), S4WD axles only.
Install the vent hose to the retainer clips, all axles.
Install the front differential carrier shield, if equipped. Refer to
Shield Replacement
.
Lower the vehicle.
Vent Hose Replacement 8.25 Inch Axle
Removal Procedure
Raise the vehicle. Refer to
Lifting and Jacking the Vehicle
.
Remove the front differential carrier shield , if equipped. Refer to
Shield Replacement
.
Remove the vent hose the retainers from the frame.
Remove the vent hose from the connector.
Lower the vehicle.
Remove the vent hose from the inner fender.
Installation Procedure
Install the vent hose to the inner fender.
Raise the vehicle.
Install the vent hose retainers to the frame.
Install the vent hose to the connector.
Install the front differential carrier shield , if equipped. Refer to
Shield Replacement
.
Lower the vehicle.