Did you perform the Power Windows System Check?

--

Go to Step 2

Go to Power Windows System Check

1. Disconnect the LH window switch connector.
2. Place the ignition switch in the RUN position.
3. Use a digital multimeter (DMM) in order to backprobe between the LH window switch connector CKT 70 (PNK) and ground.

Is the voltage within the specified range?

10-15 V

Go to Step 3

Go to Step 4

Replace the LH window switch. Refer to Front Side Door Window Switch Replacement .

Did you complete the repair?

--

Go to Power Windows System Check

--

Repair the open in CKT 70 (PNK). Refer to Wiring Repairs in Wiring Systems.

Did you complete the repair?

--

Go to Power Windows System Check

--