Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Power Windows System Check? | -- | Go to Step 2 | |
2 |
Is the voltage within the specified range? | 10-15 V | Go to Step 6 | Go to Step 3 |
3 | Test for an open in CKT 167 (TAN). Is the circuit OK? | -- | Go to Step 5 | Go to Step 4 |
4 | Repair the open in CKT 167 (TAN). Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | -- | |
5 | Replace the LH window switch. Refer to Front Side Door Window Switch Replacement . Did you complete the repair? | -- | -- | |
6 | With the DMM in the same place, press and hold the inoperative window DOWN switch on the LH window switch Is the voltage within the specified range? | 10-15 V | Go to Step 7 | Go to Step 9 |
7 | Test for a short to ground in CKT 167 (TAN). Is the circuit OK? | -- | Go to Step 12 | Go to Step 8 |
8 | Repair the short to ground in CKT 167 (TAN). Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | -- | |
9 | Connect a DMM between Terminal D and B+ of the inoperative window switch harness. Is the voltage within the specified range? | 10-15 V | Go to Step 12 | Go to Step 10 |
10 | Test for an open in CKT 166 (LT BLU). Is the circuit OK? | -- | Go to Step 5 | Go to Step 11 |
11 | Repair the open in CKT 166 (LT BLU). Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | -- | |
12 | With the DMM in the same place, press and hold the inoperative window UP switch on the LH window switch. Is the voltage within the specified range? | 10-15 V | Go to Step 13 | Go to Step 15 |
13 | Test for a short to ground in CKT 166 (LT BLU). Is the circuit OK? | -- | Go to Step 5 | Go to Step 14 |
14 | Repair the short to ground in CKT 166 (LT BLU). Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | -- | |
15 | Connect a DMM between terminal F of the inoperative window switch harness connector and ground. Is the voltage within the specified range? | 10-15 V | Go to Step 17 | Go to Step 16 |
16 | Repair the open or short to ground in CKT 70 (PNK). Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | -- | |
17 |
Is the voltage within the specified range? | 10-15 V | Go to Step 18 | Go to Step 19 |
18 | Replace the inoperative power window motor. Refer to Door Window Regulator Motor Replacement . Did you complete the repair? | -- | -- | |
19 |
Is the circuit OK? | -- | Go to Step 21 | Go to Step 20 |
20 | Repair the open or short to ground in CKT 667 (BRN). Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | -- | |
21 | Test for an open or short to ground in CKT 666 (DK BLU). Is the circuit OK? | -- | Go to Step 23 | Go to Step 22 |
22 | Repair the open or short to ground in CKT 666 (DK BLU). Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | -- | |
23 | Replace the inoperative window switch. Refer to Front Side Door Window Switch Replacement . Did you complete the repair? | -- | -- |
