Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the automatic day-night mirror system check? | -- | Go to Step 2 | |
2 |
Is the measured resistance greater than the specified value range? | 0 - 2 ohms | Go to Step 6 | Go to Step 3 |
3 | Measure the resistance from the inside rear view mirror connector terminal 5 to the LH outside rear view mirror connector C3 terminal B (BRN/BLK). Is the measured resistance greater than the specified value range? | 0 - 2 ohms | Go to Step 7 | Go to Step 4 |
4 | With terminal C3 of the inside rearview mirror still disconneted. Measure the resistance from the inside rear view mirror connector terminal 4 to terminal 5. Is the measured resistance greater than the specified value? | 5 ohms | Go to Step 5 | Go to Step 8 |
5 | Replace the LH outside rearview mirror. Refer to Mirror Face Replacement - Outside Electrochromatic in Doors. Is the replacement complete? | -- | -- | |
6 | Repair the open in CKT 1690 (GRY or GRY/BLK). Refer to Wiring Repairs in Wiring Systems. Is the circuit repair complete? | -- | -- | |
7 | Repair the open in CKT 1691 (PNK or PNK/BLK). Refer to Wiring Repairs in Wiring Systems. Is the circuit repair complete? | -- | -- | |
8 | Repair the short from CKT 1690 (GRY or GRY/BLK) to CKT 1691 (PNK or PNK/BLK). Refer to Wiring Repairs in Wiring Systems. is the circuit repair complete? | -- | -- |
