Did you perform the Lighting Systems Diagnostic System Check?

--

Go to Step 2

Go to Diagnostic System Check - Lighting Systems

1. Turn ON the headlamps.
2. Place the Headlamp Dimmer Switch in the HIGH BEAM position.

Do the high beam headlamps operate properly?

--

Go to Step 3

Go to Headlamps Inoperative - High Beams

Replace the instrument cluster (IPC). Refer to Instrument Cluster Replacement in Instrument Panel, Gauges, and Console.

Did you complete the replacement?

--

Go to Step 4

--

Operate the system in order to verify the repair.

Did you correct the condition?

--

System OK

Go to Step 2