Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Was the Wiper/Washer System Check performed? | -- | Go to Step 2 | Go to Wiper/Washer System Check or Wiper/Washer System Check |
2 |
Is the test light on? | -- | Go to Step 5 | Go to Step 3 |
3 | Inspect for an open in CKT 91. Was an open found? | -- | Go to Step 4 | Go to Step 8 |
4 | Repair the open in CKT 91. Is the repair complete? | -- | Go to Wiper/Washer System Check or Wiper/Washer System Check | -- |
5 | Connect a J 35616-200 from connector C1, terminal C (w/o CE1) or terminal H (w/CE1), to ground. Is the test light on? | -- | Go to Step 9 | Go to Step 6 |
6 | Inspect for an open in CKT 95. Was in open found? | -- | Go to Step 7 | Go to Step 8 |
7 | Repair the open in CKT 95. Is the repair complete? | -- | Go to Wiper/Washer System Check or Wiper/Washer System Check | -- |
8 | Replace the wiper/washer switch. Refer to Multifunction Turn Signal Lever Replacement - On Vehicle in Steering Wheel and Column - Tilt. Is the replacement complete? | -- | Go to Wiper/Washer System Check or Wiper/Washer System Check | -- |
9 |
Is there continuity? | -- | Go to Step 11 | Go to Step 10 |
10 | Repair the open in CKT 196. Is the repair complete? | -- | Go to Wiper/Washer System Check or Wiper/Washer System Check | -- |
11 | Replace the wiper motor cover. Refer to Wiper Motor Cover Replacement . Is the replacement complete? | -- | Go to Wiper/Washer System Check or Wiper/Washer System Check | -- |
