GM Service Manual Online
For 1990-2009 cars only

Step

Action

Value(s)

Yes

No

1

Did you perform Diagnostic System Check - Cellular Telephone ?

--

Go to Step 2

Go to Diagnostic System Check - Cellular Telephone

2

  1. Dock the cellular telephone handset.
  2. Turn ON the ignition.
  3. Turn on the radio and set the radio volume.
  4. Attempt to place a call in hands-free mode.
  5. Attempt to place a call using the docked handset.

Does the system operate normally?

--

Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems

Go to Step 3

3

  1. Make sure the telephone is on and that the handset is docked.
  2. Press the PHONE button on the LH side steering wheel controls.

Does a beep sound through the audio system speakers?

--

Go to Step 6

Go to Step 4

4

Check the telephone volume display on the driver information center (DIC).

Is the phone volume adjusted to more than 5 bars on the display?

--

Go to Step 6

Go to Step 5

5

Increase the phone volume, as indicated on the DIC.

Did you complete the adjustment?

--

Go to Step 18

--

6

Test the mouthpiece audio circuit for a short to battery positive voltage. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.

Did you find and correct the condition?

--

Go to Step 18

Go to Step 7

7

Test the earpiece audio circuit for a short to battery positive voltage. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.

Did you find and correct the condition?

--

Go to Step 18

Go to Step 8

8

Test the audio ground circuit for a short to battery positive voltage. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.

Did you find and correct the condition?

--

Go to Step 18

Go to Step 9

9

Test the mouthpiece audio circuit for an open. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.

Did you find and correct the condition?

--

Go to Step 18

Go to Step 10

10

Test the mouthpiece audio circuit for a short to ground. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.

Did you find and correct the condition?

--

Go to Step 18

Go to Step 11

11

Test the earpiece audio circuit for an open. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.

Did you find and correct the condition?

--

Go to Step 18

Go to Step 12

12

Test the earpiece audio circuit for a short to ground. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.

Did you find and correct the condition?

--

Go to Step 18

Go to Step 13

13

Test the audio ground circuit for an open. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.

Did you find and correct the condition?

--

Go to Step 18

Go to Step 14

14

Inspect the cellular telephone handset connector for poor connections. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems.

Did you find and correct the conditon?

--

Go to Step 18

Go to Step 15

15

Replace the cellular telephone handset and handset cord.

Did you find and correct the condition?

--

Go to Step 18

Go to Step 16

16

Inspect the cellular telephone module connector for poor connections. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems.

Did you find and correct the condition?

--

Go to Step 18

Go to Step 17

17

Replace the cellular telephone module. Refer to Radio Frequency Booster and Bracket Assembly Replacement .

Did you complete the replacement?

--

Go to Step 18

--

18

Operate the system in order to verify the repair.

Did you correct the condition?

--

System OK

--