1. Remove the right drive axle. Refer to Wheel Drive Shaft Replacement in Wheel Drive Shafts.

Important : Be careful not to damage the transmission case extension when removing the seal with a screwdriver.




2. Remove the drive axle seal (125). First use a screwdriver to pry outer the seal from the transmission. Use pliers in order to remove the remaining housing of drive axle seal from the transmission.
3. Inspect the drive axle seal mating surface on the drive axle housing for corrosion, grooves or nicks.
4. Clean the drive axle seal mating surface on the drive axle housing with crocus cloth.

Tools Required

J 39051-1 Axle Seal Installer - RH

Important: Be careful not to damage the transmission case extension when installing the drive axle seal.




1. Install the right-hand drive axle seal (125) using the J 39051-1 and a hammer.
2. Install the drive axle. Refer to Wheel Drive Shaft Replacement in Wheel Drive Shafts.