Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Pulldown System Check ? | -- | Go to Step 2 | Go to Pulldown System Check |
2 |
Does the test lamp light? | -- | Go to Step 6 | Go to Step 3 |
3 | Connect a test lamp between terminal A of the Rear Compartment Lid Pull Down Motor and ground. Does the test lamp light? | -- | Go to Step 5 | Go to Step 4 |
4 | Repair CKT 1440 (ORN) for an open or short to ground. Refer to Wiring Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Pulldown System Check | Go to Step 7 |
5 | Repair CKT 1150 (BLK) for an open or short. Refer to Wiring Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Pulldown System Check | Go to Step 8 |
6 | Test the Rear Compartment Pull Down connector for proper terminal contact. Refer to Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Pulldown System Check | Go to Step 7 |
7 | Replace the Rear Compartment Lid Pull Down Motor. Refer to Pulldown Unit Replacement - Rear Compartment Lid . Did you find and correct the condition? | -- | Go to Step 8 | -- |
8 |
Is the system check complete? | -- | System OK | -- |
