Step
| Action
| Value(s)
| Yes
| No
|
1
| Did you perform the Power Windows System Check?
| --
| Go to
Step 2
| Go to
Power Windows System Check
|
2
|
- Use a digital multimeter (DMM) in order to backprobe the inoperative
RH rear window switch terminal A to terminal E.
- Press the rear power window UP switch, then the window DOWN switch.
Is the voltage within the specified range?
| 10-15 V
| Go to
Step 8
| Go to
Step 3
|
3
|
- Use a DMM in order to backprobe the inoperative RH rear window
switch connector terminal F to terminal D.
- Backprobe from terminal F to terminal H.
Is the voltage within the specified range?
| 10-15 V
| Go to
Step 5
| Go to
Step 4
|
4
|
- Use a DMM in order to backprobe the LH front window switch connector C1
terminal F (PPL) to terminal E (LT GRN).
- Press the rear power window UP switch, then the window DOWN switch
on the LH front window switch.
Is the voltage within the specified range?
| 10-15 V
| Go to
Step 6
| Go to
Step 7
|
5
|
- Ensure that the RH rear window switch connector is clean and tight.
- If the connector is OK, replace the RH rear window switch. Refer
to
Front Side Door Window Switch Replacement
.
Is the repair complete?
| --
| Go to
Power Windows System Check
| --
|
6
| Repair the open in CKT 170 (LT GRN) or in CKT 171 (PPL).
Refer to
Wiring Repairs
in Wiring Systems.
Is the repair complete?
| --
| Go to
Power Windows System Check
| --
|
7
|
- Ensure that the LH front power window switch connector is clean
and tight.
- If the connector is OK, replace the LH front power window switch.
Refer to
Front Side Door Window Switch Replacement
.
Is the repair complete?
| --
| Go to
Power Windows System Check
| --
|
8
|
- Use a DMM in order to backprobe the RH rear window motor connector
from terminal A to terminal B.
- Press the RH rear window UP switch, then the window DOWN switch.
Is the voltage within the specified range?
| 10-15 V
| Go to
Step 9
| Go to
Step 10
|
9
|
- Ensure that the inoperative rear power window motor connector
is clean and tight.
- If the connector is OK, replace the RH rear window motor. Refer
to
Door Window Regulator Motor Replacement
.
Is the repair complete?
| --
| Go to
Power Windows System Check
| --
|
10
| Repair the open or the short to ground in CKT 671 (BRN) or in CKT 670
(DK BLU). Refer to
Wiring Repairs
in
Wiring Systems.
Is the repair complete?
| --
| Go to
Power Windows System Check
| --
|
