GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 1999 🢒 Eldorado 🢒 Body and Accessories 🢒 Body Front End 🢒 Hood Secondary Latch Replacement

Removal Procedure
  1. Open the hood.

    2. Object Number: 366265 Size: SH
  2. Remove the remote handle rod (2) retaining clip.
  3. Remove the  bolts that retain the secondary latch (3).

Installation Procedure

    Object Number: 366265 Size: SH
  1. Position the secondary latch (3) to the hood panel (1).

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the 2 bolts that retain the secondary latch (3).

    3. Tighten
    Tighten the bolts to 12 N·m (106 lb in).

  3. Install the remote handle rod (2) and the retaining clip.
  4. Close the hood.
  5. Inspect the secondary latch operation.