GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 1999 🢒 Eldorado 🢒 Body and Accessories 🢒 Bumpers 🢒 Molding Replacement - Front Bumper

Removal Procedure
  1. Remove and disassemble the front bumper assembly from the vehicle. Refer to Front Bumper Assembly-DeVille.

    2. Object Number: 372833 Size: SH
  2. Remove the nut that retains the molding.
  3. From the backside of the fascia (1), release the snap tabs that retain the side moldings (2) to the fascia.
  4. Release the snap tabs that retain the side moldings to the center molding.
  5. Remove the push-in fasteners that retain the outer edges of the center molding to the fascia (1).
  6. From the backside of the fascia (1), release the snap tabs that retain the center molding to the fascia.

Installation Procedure

    Object Number: 372833 Size: SH
  1. Assemble and install the front bumper to the vehicle.
  2. Install the center moldings and engage the snap tab.
  3. Install the push-in fasteners to the outer edges of the center molding.
  4. Install the side moldings (2) and engage the tabs.
  5. Install the nut.
  6. Finger tighten the nut.