Notice: Use of harsh chemicals when cleaning can damage exterior lamps. Suggested
cleaners are a mild soap and water, or Varnish Makers and Painters (VM&P)
Naptha. VM&P Naptha is a specific type of naptha and should
not be substituted by any other naptha.
The following components are attached to the body panels
with adhesive tape:
In order to ensure a good replacement of new or old moldings, emblems
and name plates, take the following precautions:
| • | Warm the panel surface to between 21°-32°C (70°F-90°F). |
| • | Remove any wax or oily film. |
The following methods for attachment are listed:
| • | Completely removed moldings |
The emblems and the nameplates that are located on the rear compartment
lid are attached with adhesive. Refer to
Molding Repair
for information about replacing or attaching loose
adhesive attached emblems or nameplates. Refer to the following procedures
for information about the emblem and nameplate locations:
