Emblem/Nameplate Replacement DeVille

Wash the affected panel with soap and water. Wipe dry.

Remove all traces of adhesive from the body panel and the back of the molding. Use 3M General Purpose Adhesive Cleaner 08984 or an equivalent. Wipe the panel with a clean cloth and an alcohol/water mixture.

1. Use the dimensions shown in order to mark the proper position of the emblem/nameplate.

Use a length of masking tape or magnetic strip.

2. If the body is below 21°C (70°F) due to shop temperature or outside temperature, warm the body panel with a heat lamp or a heat gun while proceeding with the next step.
3. If needed, apply a double-coated acrylic foam tape such as 3M Super Automotive Attachment Tape or an equivalent to the emblem/nameplate.

•	3M 06380 has a white backing

•	3M 06377 has a black backing

•	3M 06382 has a gray backing

4. Align the emblem/nameplate (3).

Press the emblem/nameplate firmly into place in order to ensure proper adhesion.

Emblem/Nameplate Replacement DeVille and YP7

1. Wash the affected panel with soap and water.

Wipe the panel dry.

2. Remove all traces of adhesive from the body panel and the back of the molding. Use 3M General Purpose Adhesive Cleaner 08984 or an equivalent. Wipe the panel with a clean cloth and an alcohol/water mixture.

1. Use the dimensions shown in order to mark the proper position of the emblem/nameplate.

Use a length of masking tape or magnetic strip.

2. If the body is below 21°C (70°F) due to shop temperature or outside temperature, warm the body panel using a heat lamp or a heat gun while proceeding with the next step.
3. If needed, apply a double-coated acrylic foam tape such as 3M Super Automotive Attachment Tape or an equivalent to the emblem/nameplate:

•	3M 06380 has a white backing

•	3M 06377 has a black backing

•	3M 06382 has a gray backing

4. Align the emblem/nameplate (5).
5. Firmly press the emblem/nameplate into place in order to ensure proper adhesion of the emblem/nameplate.

Emblem/Nameplate Replacement DeVille and YP8

1. Wash the affected panel with soap and water.

Wipe the panel dry.

2. Remove all traces of adhesive from the body panel and the back of the molding. Use 3M General Purpose Adhesive Cleaner 08984 or an equivalent. Wipe the panel with a clean cloth and an alcohol/water mixture.

1. Use the dimensions shown in order to mark the proper position of the emblem/nameplate.

Use a length of masking tape or magnetic strip.

2. If the body is below 21°C (70°F) due to shop temperature or outside temperature, warm the body panel using a heat lamp or a heat gun while proceeding with the next step.
3. If needed, apply a double-coated acrylic foam tape such as 3M Super Automotive Attachment Tape or an equivalent to the emblem/nameplate:

•	3M 06380 has a white backing

•	3M 06377 has a black backing

•	3M 06382 has a gray backing

4. Align the emblem/nameplate (3).
5. Firmly press the emblem/nameplate into place in order to ensure proper adhesion of the emblem/nameplate.

Emblem/Nameplate Replacement DeVille and YP9 Export

1. Wash the affected panel with soap and water.

Wipe the panel dry.

2. Remove all traces of adhesive from the body panel and the back of the molding. Use 3M General Purpose Adhesive Cleaner 08984 or an equivalent. Wipe the panel with a clean cloth and an alcohol/water mixture.

1. Use the dimensions shown in order to mark the proper position of the emblem/nameplate.

Use a length of masking tape or magnetic strip.

2. If the body is below 21°C (70°F) due to shop temperature or outside temperature, warm the body panel using a heat lamp or a heat gun while proceeding with the next step.
3. If needed, apply a double-coated acrylic foam tape such as 3M Super Automotive Attachment Tape or an equivalent to the emblem/nameplate:

•	3M 06380 has a white backing

•	3M 06377 has a black backing

•	3M 06382 has a gray backing

4. Align the emblem/nameplate (3).
5. Firmly press the emblem/nameplate into place in order to ensure proper adhesion of the emblem/nameplate.