Radio Front Speaker Replacement DeVille with UQ6

1. Remove the speaker grille (1) from the center of the instrument panel.



2. Remove the 4 fasteners in order to release the speaker (3).
3. Lift out the speaker (3).
4. Disconnect the electrical connections (2) from the speaker (3).

1. Connect the electrical connections (2) to the speaker (3).

Align the speaker to the IP.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the 4 fasteners in order to attach the speaker (3).

Tighten
Tighten the fasteners to 2 N·m (18 lb in).

3. Install the speaker grille.