GM Service Manual Online
For 1990-2009 cars only

Step

Action

Value(s)

Yes

No

1

Was the Radio Audio System Diagnostic System Check preformed?

--

Go to Step 2

Go to Diagnostic System Check - Radio/Audio System

2

  1. Disconnect the radio connector.
  2. Turn the ignition switch to the RUN position.
  3. Measure the voltage from the radio connector terminal F1 to ground.

Is the voltage within the specified range?

10-15 V

Go to Step 3

Go to Step 4

3

Measure the voltage from the radio connector terminal F1 to E16.

Is the voltage within the specified range?

10-15 V

Go to Step 5

Go to Step 6

4

Repair the open or short to ground in CKT 40 (ORN).

Did you complete the repair?

--

Go to Diagnostic System Check - Radio/Audio System

--

5

Measure the voltage from the radio connector terminal F1 to F5.

Is the voltage within the specified range?

10-15 V

Go to Step 7

Go to Step 8

6

Repair the open in CKT 1051 (BLK).

Did you complete the repair?

--

Go to Diagnostic System Check - Radio/Audio System

--

7

Replace the radio. Refer to one of the flowing:

    •  Radio Replacement
    •  Radio Replacement

.

Did you complete the repair?

--

Go to Diagnostic System Check - Radio/Audio System

--

8

Repair the open in CKT 1250 (BLK).

Did you complete the repair?

--

Go to Diagnostic System Check - Radio/Audio System

--