GM Service Manual Online
For 1990-2009 cars only

Step

Action

Value(s)

Yes

No

1

Was the Wiper/Washer System Check performed?

--

Go to Step 2

Go to Wiper/Washer System Check

2

  1. Disconnect wiper motor connector C2.
  2. Turn the ignition switch ON.
  3. Set the wiper switch to HI.
  4. Connect a test light from connector C2, terminal A, to ground.

Is the test light on?

--

Go to Step 3

Go to Step 6

3

Inspect for a poor connection at wiper motor connector C2.

Was a poor connection found?

--

Go to Step 4

Go to Step 5

4

Repair the poor connection at connector C2.

Is the repair complete?

--

Go to Wiper/Washer System Check

--

5

Replace the wiper motor. Refer to Windshield Wiper Motor Replacement .

Is the replacement complete?

--

Go to Wiper/Washer System Check

--

6

Inspect for an open in CKT 92.

Was an open found?

--

Go to Step 7

Go to Step 8

7

Repair the open in CKT 92.

Is the repair complete?

--

Go to Wiper/Washer System Check

--

8

Replace the wiper/washer switch. Refer to Multifunction Turn Signal Lever Replacement - On Vehicle .

Is the replacement complete?

--

Go to Wiper/Washer System Check

--