GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 1999 🢒 Eldorado 🢒 Body and Accessories 🢒 Lighting Systems 🢒 High Mount Stop Lamp Replacement

Removal Procedure
  1. Pry the carpet-trimmed cover from the high-mounted stoplamp.

    2. Object Number: 365022 Size: SH
  2. Remove the screw (4).
  3. Pull the stoplamp (1) toward the front of the vehicle and up in order to disengage the retainers.
  4. Disconnect the electrical connectors (5).
  5. Remove the stoplamp (1).

Installation Procedure

    Object Number: 365022 Size: SH
  1. Install the stoplamp (1) to the vehicle.
  2. Connect the electrical connectors (5).
  3. Engage the stoplamp (1) to the retaining holes in the rear shelf panel (2).

    4. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  4. Install the screw (4).

    5. Tighten
    Tighten the screw to 2 N·m (18 lb in).

  5. Install the high-mounted stoplamp cover.