Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Was the Headlight System Check performed? | -- | Go to Step 2 | Go to Headlight System Check |
2 |
Is the resistance less than the specified value? | 20 ohms | Go to Step 3 | Go to Step 8 |
3 | Inspect CKT 359 (PPL) for an open between the left high beam headlamp and the DRL relay. Refer to Testing for Continuity in Wiring Systems. Is CKT 359 OK? | -- | Go to Step 4 | Go to Step 6 |
4 | Inspect CKT 11 (LT GRN) for an open between the left high beam headlamp and the connector C104. Refer to Testing for Continuity in Wiring Systems. Is CKT 11 OK? | -- | Go to Step 5 | Go to Step 6 |
5 | Inspect CKT 711 (DK GRN/WHT) for an open between the connector C104 and the underhood fuse block. Refer to Testing for Continuity in Wiring Systems. Is CKT 711 OK? | -- | Go to Step 7 | Go to Step 6 |
6 | Repair the open in the appropriate circuit. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Headlight System Check | -- |
7 | Repair the open in CKT 750 (BLK). Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Headlight System Check | -- |
8 | Replace the DRL relay. Is the DRL relay replacement complete? | -- | Go to Headlight System Check | -- |
