Removal Procedure
- Remove the trunk front
trim panel.
- Access the rear electronics compartment.
- Disconnect the electrical connectors from the CVRSS control module.
- Remove the CVRSS control module from the right electronics bay.
Installation Procedure
- Install the CVRSS control module in the right electronics bay.
- Connect the electrical
connectors to the CVRSS control module.
- Close the rear electronics compartment.
- Install the trunk front trim panel.
- Perform the CVRSS Control Module Calibration. Refer to
Electronic Suspension Control Module Calibration
.
- Perform the ALC Trim Height Adjustment. Refer to
Trim Height Adjustment