Cellular Telephone Replacement Full Console

1. Remove the handset from the hang up cup.
2. Remove the console storage bin. Refer to Front Floor Console Compartment Replacement in Instrument Panel, Gauges, and Console.
3. Remove the screws that attach the phone mounting base to the console bin.
4. Disconnect the handset cable from the interface module.
5. Disconnect the electrical connector from the interface module.
6. Remove the interface module from the mounting plate.

1. Install the interface module to the phone mounting plate.
2. Connect the electrical connector to the interface module.
3. Connect the phone handset cable to the interface module.
4. Install the phone mounting plate to the console bin.
5. Install the console storage bin. Refer to Front Floor Console Compartment Replacement in Instrument Panel, Gauges, and Console.
6. Install the handset to the hang up cup.
7. Press PWR in order to verify the proper electrical connections.

Cellular Telephone Replacement Mini Console

1. Remove the handset from the hang up cup.
2. Disconnect the electrical connection from the handset to the hang up cup.
3. Disconnect the electrical connection from the base of the phone mounting plate.
4. Remove the screws that secure the phone mounting plate to the console.
5. Remove the phone mounting plate.

1. Install the phone mounting plate.
2. Install the screws in order to secure the phone mounting plate to the console.
3. Connect the electrical connector to the base of the phone mounting plate.
4. Connect the electrical connector from the handset to the hang up cup.
5. Press the PWR button on the handset in order to verify the proper electrical connections.

Cellular Telephone Replacement 60/40 Armrest

1. Open the armrest lid.
2. Disconnect the electrical connection from the interface module at the hinge.
3. Lift the hang up cup from the armrest.
4. Remove the screws securing the hang up cup to the storage tray bracket.

1. Install the screws in order to secure the hang up cup to the storage bracket.
2. Install the hang up cup assembly on the armrest.
3. Connect the electrical connection at the interface module.
4. Close the armrest lid.