Seat Belt System Circuit Description Eldorado

The seat belt retractor system automatically retracts the driver's and passenger's seat belts. The left seat belt retracts when the following conditions are met:

The passenger's seat belt retracts in the same manner when the right door is opened.

Battery positive voltage (B+) is applied to each seat belt retractor actuator at all times through the rear compartment fuse block BATT Fuse via CKT 1840 (ORN). When a door is opened, the respective front door lock actuator closes. This action applies ground to the appropriate seat belt retractor actuator . When a seat belt retractor actuator receives power and ground, the seat belt retractor retracts the seat belt.

The occupant of the front seats can adjust the amount of slack in their shoulder belt. To set the comfort level for the shoulder belt, perform the following steps:

1. Sit well back in the seat.
2. Pull the shoulder belt out.
3. Just before the belt reaches the end, pull the belt quickly.
4. Let the belt go back all the way. You should hear a slight clicking sound.
5. Pull the shoulder belt out just slightly. The shoulder belt will retain the slack setting.