Overhaul Procedure
- Remove the caliper anchor
bracket. Refer to
Brake Caliper Bracket Replacement
.
- Mount the anchor bracket in a vise.
- Remove the Pin bolt boots from caliper anchor bracket.
- Remove the bushings from
the anchor bracket mounting bores. Use a screwdriver or punch to bend the
bushings inward and extract bushings with needle nose pliers.
- Clean all parts in clean, denatured alcohol. Dry with unlubricated
compressed air.
- Inspect the caliper anchor bracket for cracks. If cracked, replace
bracket
- Lubricate and install new bushings into bracket mounting
bores.
- Lubricate and install new pin bolt boots.
- Install the anchor bracket. Refer to
Brake Caliper Bracket Replacement
.