Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Brake Warning System Check? | -- | Go to Step 2 | |
2 | Turn the ignition switch from the RUN position to the START position. Did the PARK indicator illuminate briefly? | -- | Go to Step 3 | Go to Step 8 |
3 | Engage the parking brake. Did the PARK indicator illuminate? | -- | Go to Step 6 | Go to Step 4 |
4 |
Is the voltage within the specified range? | 10-15 V | Go to Step 7 | Go to Step 5 |
5 | Repair an open in CKT 1134 (LT BLU) and test for a short to B+. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | -- | |
6 |
Is DTC C1210 set current? | -- | Go to Brake Warning Indicator, Message, and Chime Inoperative | Go to Step 9 |
7 | Replace the parking brake switch. Did you complete the repair? | -- | -- | |
8 | Test the instrument panel cluster PARK indicator and the circuit for an open. Did you complete the repair. | -- | -- | |
9 | Test the instrument panel cluster BRAKE FLUID indicator and the circuit for an open. Did you complete the repair? | -- | -- |
