GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 1999 🢒 Eldorado 🢒 Suspension 🢒 Road Sensing Suspension (RSS) 🢒 Electronic Suspension Front Position Sensor Replacement

Removal Procedure

    Object Number: 258355 Size: MH
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General information.
  2. Remove the wheel from the vehicle. Refer to Tire and Wheel Removal and Installation Tires and Wheels.
  3. Disconnect the sensor harness connector from the vehicle harness connector.
  4. Disconnect the sensor harness clips from the vehicle at two places.

    5. Object Number: 258356 Size: SH
  5. Disconnect the sensor link from the ball stud.
  6. Remove the two screws and position sensor from the vehicle.

Installation Procedure

    Object Number: 258356 Size: SH
  1. Install the position sensor on the vehicle with two screws.

    2. Tighten
    Tighten two screws to 10 N·m (89 lb in).

  2. Connect the sensor link to the ball stud.

    3. Object Number: 258355 Size: MH
  3. Connect the sensor harness connector to the vehicle harness connector.
  4. Connect the sensor harness clips to the vehicle at two places.
  5. Install the wheel onto the vehicle. Refer to Tire and Wheel Removal and Installation Tires and Wheels.
  6. Lower the vehicle. Refer to Lifting and Jacking the Vehicle General Information.