GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 1999 🢒 Eldorado 🢒 Engine 🢒 Engine Controls - 4.0L and 4.6L 🢒 Engine Splash Shield Replacement

Removal Procedure

    Object Number: 366317 Size: SH
  1. Open the hood.
  2. Remove the 3 bolts (2).
  3. Pull down the rear of the splash shield.
  4. Remove the shield from the slots in the engine compartment panel.

Installation Procedure

    Object Number: 366317 Size: SH
  1. Insert the tabs on the shield into the engine compartment panel.
  2. Align the holes iin the shield with the holes on the engine frame.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the bolts (2).

    4. Tighten
    Tighten the bolts to 6 N·m (53 lb in).

  4. Close the hood.