GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Cadillac
🢒
2003
🢒
DeVille
🢒
Body and Accessories
🢒
Seats
🢒 Power Seat Drive Cable Replacement
Removal Procedure
Caution:
Refer to
SIR Caution
in the Preface section.
Disable the SIR. Refer to
SIR Disabling and Enabling
or to
SIR Disabling and Enabling
in SIR.
Remove the seat bottom and frame assembly. Refer to
Front Seat Cushion Replacement
.
If the cable is equipped with a position sensor, remove the sensor retention clip and disconnect the electrical connector.
Squeeze the collar of the cable in order to release the cable.
Pull the cable out of the fitting until the cable end clears the fitting.
Remove the cable or cable/sensor assembly.
Installation Procedure
Install the cable or cable/sensor assembly by pushing the ends into the fittings until the clip snaps into place.
If the cable is equipped with a position sensor, install the sensor retention clip and connect the electrical connector.
Install the seat bottom and frame assembly. Refer to
Front Seat Cushion Replacement
.
Enable the SIR. Refer to
SIR Disabling and Enabling
or to
SIR Disabling and Enabling
in SIR.
If the vehicle is equipped with memory seats, calibrate the seat. Refer to
Memory Seat Calibration
.