This window lockout switch or circuits that generate this diagnostic trouble code (DTC) are built-in parts of the driver door switch assembly (DDSA). There are no external circuits. The DDSA internally supplies power and ground to the contacts of the window lockout switch. When the window lockout switch is operated, the switch contacts momentarily close to ground, providing the DDSA with a signal. The DDSA processes the signal, assignes to digital message to it, then sends the message to the passenger door modules via the class 2 serial data circuit. Upon receiving a class 2 message to lockout the passenger door windows, the passenger door modules will not allow their associated window to operate from the associated passenger door window switch.

If the window lockout is OFF deactivated, it will transition to ON activated when the switch button is momentarily pressed once. If the window lockout is already ON, it will transition to OFF when the switch button is momentarily pressed once. When the lockout is active, the switch button LED will be illuminated and the passenger door windows will not be operational from the passenger door window switches. However, the passenger door windows can still be operated from the appropriate power window switch built into the DDSA.

With the ignition switch ON, the DDSA checks the switch inputs every 3 seconds regardless of source voltage.

If the driver door switch assembly (DDSA) determines that the window lockout switch is closed, grounded for more than 30 continuous seconds, it sets this DTC.

The DDSA ignores inputs from the window lockout switch.

The DDSA clears the current code when it no longer receives inputs from the lockout switch.

An intermittently sticking switch can cause this DTC to set. Refer to Testing for Electrical Intermittents in Wiring Systems.

The number below refers to the step numbers on the diagnostic table.

2. Checks the existing state of the window lockout switch by using the current state of the input parameter.