Removal Procedure
- Pull edge of drivers side
carpet back enough to access grommet.
- Remove the grommet from the floor pan.
- Raise the vehicle and support. Refer to
Lifting and Jacking the Vehicle
in General Information.
- Disconnect the front cable
housing (2) from the intermediate cable (1) at the cable clip.
- Lower the vehicle. Refer to
Lifting and Jacking the Vehicle
in General Information.
- Disconnect the cable from the lever assembly.
- Remove the parking brake front cable assembly.
Installation Procedure
- Position the front parking
brake cable assembly in the vehicle.
- Connect the cable to the lever assembly.
- Raise the vehicle and support. Refer to
Lifting and Jacking the Vehicle
in General Information.
- Connect the front cable
housing (2) to the intermediate cable (1) at the cable clip.
- Lower the vehicle. Refer to
Lifting and Jacking the Vehicle
in General Information.
- Seat the grommet in the
floor pan.
- Install carpet into place.
- Adjust the parking brake cable. Refer to
Park Brake Cable Inspection
.