Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Pulldown System Check ? | -- | Go to Step 2 | Go to Pulldown System Check |
2 |
Does the test lamp light? | -- | Go to Step 9 | Go to Step 3 |
3 | Connect a test lamp between terminal A of the Rear Compartment Lid Pull Down Motor and ground. Does the test lamp light? | -- | Go to Step 4 | Go to Step 7 |
4 | Does the rear compartment lamp light: | -- | Go to Step 6 | Go to Step 5 |
5 |
Does the test lamp light? | -- | Go to Step 10 | Go to Step 8 |
6 | Test for an open or short in CKT 138 (RED). Did you find and correct the condition? | -- | Go to Pulldown System Check | Go to Step 10 |
7 | Repair the open or short in CKT 1440 (ORN). Refer to Wiring Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Pulldown System Check | -- |
8 | Repair the open in CKT 1150 (BLK). Did you find and correct the condition? | -- | Go to Pulldown System Check | -- |
9 | Test the rear pull down connector for proper terminal contact. Refer to Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Pulldown System Check | Go to Step 11 |
10 | Test the rear compartment lid release switch terminal for proper contact. Refer to Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Pulldown System Check | Go to Step 12 |
11 | Replace the Rear Compartment Lid Pull Down Motor. Refer to Pulldown Unit Replacement - Rear Compartment Lid . Is the replacement complete? | -- | Go to Pulldown System Check | -- |
12 | Replace the Rear Compartment Lid Release Switch. Refer to Rear Compartment Lid Lock Actuator Replacement . Is the replacement complete? | -- | Go to Step 13 | -- |
13 |
Is the system check complete? | -- | System OK | -- |
