Did you perform the Brake Warning System Check?

--

Go to Step 2

Go to Brake Warning System Check

1. Connect a scan tool.
2. Select IPC on the scan tool.

Is DTC C1210 set current?

--

Go to Step 3

Go to Step 8

1. Disconnect the brake fluid level switch.
2. Connect a DMM between the brake fluid level switch harness connector terminal A and terminal B.
3. Turn the ignition switch to the RUN position.

Is the voltage within the specified range?

10-15 V

Go to Step 6

Go to Step 4

1. Connect a DMM between the brake fluid level harness connector terminal B and ground.
2. Turn the ignition switch to the RUN position.

Is the voltage within the specified range?

10-15 V

Go to Step 7

Go to Step 5

Repair an open in CKT 849 (PNK). Refer to Wiring Repairs in Wiring Systems. Test for a short to B+.

Did you complete the repair?

--

Go to Brake Warning System Check

--

Replace the brake fluid level switch. Refer to Brake Fluid Level Indicator Switch Replacement .

--

Go to Brake Warning System Check

--

Repair an open in CKT 51 (BLK/WHT) and inspect for a short to B+.

Did you complete the repair?

--

Go to Brake Warning System Check

--

Test the instrument panel cluster BRAKE FLUID indicator and the circuit for an open.

Did you complete the repair?

--

Go to Brake Warning System Check

--