Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
DEFINITION: This table diagnoses the lumbar support (option AL2) in the left and the right seat. The diagnosis does not include the left seat if the left seat is equipped with the memory function (option A45). For diagnosis of the lumbar support in the left seat equipped with A45, refer to Lumbar Support System Check . | ||||
1 | Did you perform the Lumbar Support System Check? | -- | Go to Step 2 | |
2 | Use a test lamp in order to backprobe the lumbar horizontal relay connector from cavity C (RED) to ground. Does the test lamp light? | -- | Go to Step 3 | Go to Step 11 |
3 | Use a test lamp in order to backprobe the lumbar horizontal relay connector from cavity C (RED) to cavity D (BLK). Does the test lamp light? | -- | Go to Step 4 | Go to Step 12 |
4 |
Does the test lamp light? | -- | Go to Step 5 | Go to Step 13 |
5 |
Does the test lamp light? | -- | Go to Step 6 | Go to Step 14 |
6 |
Does the test lamp light? | -- | Go to Step 7 | Go to Step 16 |
7 |
Does the test lamp light? | -- | Go to Step 8 | Go to Step 16 |
8 | Inspect for an open or short to ground in CKT 610 (PNK or PNK/BLK) (LH) or CKT 210 (WHT or PNK/BLK) (RH) between the lumbar horizontal relay and the lumbar horizontal motor. Refer to Testing for Continuity or Testing for Short to Ground in Wiring Systems. Is the wiring OK? | -- | Go to Step 9 | Go to Step 17 |
9 | Inspect for an open or short to ground in CKT 611 (DK BLU or DK BLU/WHT) (LH) or CKT 211 (DK BLU or DK BLU/WHT) (RH) between the lumbar horizontal relay and the lumbar horizontal motor. Refer to Testing for Continuity or Testing for Short to Ground in Wiring Systems. Is the wiring OK? | -- | Go to Step 10 | Go to Step 17 |
10 | Replace the lumbar horizontal motor. Refer to Front Seat Lumbar Support Replacement . Is the repair complete? | -- | -- | |
11 | Repair the open in CKT 742 (RED) between S352 (LH) or S356 (RH) and the lumbar horizontal relay. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |
12 | Repair the open in CKT 850 (BLK) between S351 (LH) or S357 (RH) and the lumbar horizontal relay. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |
13 | Inspect for an open or short to ground in CKT 466 (GRY) (LH) or CKT 758 (GRY) (RH) between the lumbar switch and the lumbar horizontal relay. Refer to Testing for Continuity or Testing for Short to Ground in Wiring Systems. Is the wiring OK? | -- | Go to Step 15 | Go to Step 17 |
14 | Inspect for an open or short to ground in CKT 385 (PPL) (LH) or CKT 759 (PPL) (RH) between the lumbar switch and the lumbar horizontal relay. Refer to Testing for Continuity or Testing for Short to Ground in Wiring Systems. Is the wiring OK? | -- | Go to Step 15 | Go to Step 17 |
15 | Replace the lumbar switch. Is the repair complete? | -- | -- | |
16 | Replace the lumbar horizontal relay. Is the repair complete? | -- | -- | |
17 | Repair the suspect wiring. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |
