The rear window defogger system consists of the following
components:
| | The tinted glass has a number of horizontal ceramic silver compound
lines. |
| | The bus bars are baked into the inside surface during the glass forming
operation. |
The feed wire terminal is soldered to the bus bar on the left side.
The ground wire terminal is soldered to the bus bar on the right side. This
system operates on battery voltage. Heat from the window may not be detected
by finger touch. The length of time required in order to remove interior
fog from the rear window will very with the following conditions:
| • | The outside window temperature |
| • | The atmospheric pressure |
| • | The number of passengers |
This system uses a switch with an integral indicator lamp. After 5 to
10 minutes of system operation, an automatic timer will automatically
turn off the system. Turn one of the following switches to OFF in order to
turn off the system during this operating period:
