Tail Lamp Replacement Eldorado

1. Remove the rear compartment trim. Refer to Rear Compartment Trim Panel Replacement in Body Rear End.



2. Remove the nuts (1) that secure the tail lamp (2).
3. Disconnect the bulb sockets (4).
4. Remove the push-in fasteners.
5. Remove the tail lamp (2).

1. Install the tail lamp.
2. Connect the bulb sockets (4).
3. Position the lamp (2) to the quarter panel.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

4. Install the nuts (1) that secure the tail lamp (2).

Tighten
Tighten the nuts to 1.5 N·m (13 lb in).

5. Install the push-in fasteners.
6. Install the rear compartment trim. Refer to Rear Compartment Trim Panel Replacement in Body Rear End.