Removal Procedure
Caution: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before servicing
any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to
the vehicle or its components.
- Disconnect
the negative battery cable.
- Raise the vehicle. Refer to
Lifting and Jacking the Vehicle
in Genaral Information.
- Remove the lower front air deflector.
- Drain the coolant. Refer to
Cooling System Draining and Filling
.
- Lower the vehicle.
- Remove the radiator outlet
hose (2) from the radiator.
- Remove the radiator outlet hose (2) from the engine.
Installation Procedure
- Install the radiator outlet
hose (2) to the engine.
- Install the radiator outlet hose (2) to the radiator.
- Install the lower front
air deflector.
- Lower the vehicle.
- Refill the cooling system. Refer to
Cooling System Draining and Filling
.
- Connect the negative battery cable.
- Start the engine.
- Check for leaks.