Tools Required

J 38816-1A Water Pump Remover/Installer

1. Drain the cooling system. Refer to Cooling System Draining and Filling .
2. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement in Engine Controls.



3. Remove the water pump belt cover (1).



4. Remove the water pump drive belt.
5. Remove the bypass hose.



6. Remove the lower radiator hose from the thermostat housing.



7. Remove the bolts from the water pump cover.
8. Remove the water pump cover.



9. Remove the water pump, the pump seal, and the gasket from the housing using the J 38816-1A . Turn the tool clockwise in order to remove the water pump.
10. Remove the water pump from the vehicle.
11. Clean the water pump and the pump cover sealing surfaces.

Tools Required

J 38816-1A Water Pump Remover/Installer

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

1. Install the water pump using J 38816-1A . Turn the tool counterclockwise in order to install the pump.

Tighten
Tighten the water pump to 100 N·m (73 lb ft).




2. Install the water pump housing cover and the bolts.

Tighten
Tighten the water pump housing cover bolts to 10 N·m (89 lb in).




3. Install the lower radiator hose to the thermostat housing.



4. Install the thermostat bypass hose.
5. Install the water pump drive belt.



6. Install the water pump belt cover (1).
7. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement in Engine Controls.
8. Refill the cooling system. Refer to Cooling System Draining and Filling .