Warning: Refer to Exhaust Service Warning in the Preface section.

Warning: Refer to Protective Goggles and Glove Warning in the Preface section.

Warning: Eye protection must be worn when drilling rivets to reduce the chance of personal injury.

1. Remove the exhaust system. Refer to Exhaust System Replacement.
2. Drill out the heat shield rivets (2).
3. Remove the heat shield.

1. Position the heat shield to the floor panel.
2. Using a rivet gun, install the rivets (2), except for this location (1), this rivet will be installed with the oxygen sensor heat shield.
3. Install the exhaust system. Refer to Exhaust System Replacement.