GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2001 🢒 Catera 🢒 Transmission/Transaxle 🢒 Automatic Transmission - 4L30-E 🢒 Adapter Case Control Valve Assemble

    Object Number: 175369 Size: SH
  1. Install the PCS (404).
  2. Install the PCS retainer (403).

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the PCS bolt (402).

    4. Tighten
    Tighten the bolts to 10 N·m (87 lb in).


    Object Number: 175366 Size: SH
  4. Install the 3-4 accumulator control valve (409).
  5. Install the 3-4 accumulator valve (407).
  6. Install the 3-4 accumulator valve bore plug (405).

    7. Object Number: 175364 Size: SH
  7. Install the feed limit valve spring seat (411) and the feed limit valve (412).
  8. Install the feed limit valve spring (410).
  9. Install the feed limit valve spring retainer (418).

    10. Object Number: 175363 Size: SH
  10. Install the PCS filter (415).
  11. Install the PCS plug seal (413) onto the PCS plug (414).
  12. Install the PCS plug (414).
  13. Install the PCS plug retainer (419).

    14. Object Number: 175362 Size: SH
  14. Install the TCC solenoid (416).
  15. Install the TCC solenoid bolt (402)

    16. Tighten
    Tighten the bolts to 10 N·m (87 lb in).