GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 786850  Size: SH
  1. With a small flat-bladed tool pry on the side of the front heated seat switch and remove from the instrument panel (I/P) accessory trim panel. Driver side shown, passenger side similar.
  2. This will disengage the heated seat switch from the electrical connector.

Installation Procedure


    Object Number: 786851  Size: SH
  1. Align the heated seat switch with the electrical connector in the I/P accessory trim plate. Driver side shown, passenger side similar.
  2. Push inward on the heated seat switch until fully seated in the I/P accessory trim plate.
  3. This will engage the heated seat switch to the electrical connector.