Removal Procedure
- Remove the rear seat cushion. Refer to
Rear Seat Cushion Replacement
.
- Remove the rear seat cushion cover. Refer to
Rear Seat Cushion Cover Replacement
.
Important: The rear seat cushion cover contains two heating elements a right and
left, both heater elements are serviced the same way.
- Remove seat cushion heater element by:
3.1. | Cut along seams on the inside of the seat cover, being careful
not to cut through the front side of the seat cover. |
3.2. | Cut the heater element eletrical wiring. |
3.3. | Remove the heater element and wiring from the seat cover. |
Installation Procedure
- Install the rear seat
cushion heating element to the seat cover.
- Install seat cushion heater element eletrical wiring to the original
position of the old wiring harness.
- Fold over ends of new heater element and tape to the seat cushion
cover.
- Install the rear seat cushion cover. Refer to
Rear Seat Cushion Cover Replacement
.
- Install the rear seat. Refer to
Rear Seat Cushion Replacement
.