Test Description
The number(s) below refer to the step number(s) on the diagnostic table.
-
Lack of communication may be due to a partial malfunction of the class 2 serial data circuit or due to a total malfunction of the class 2 serial data circuit. The specified procedure will determine the particular condition.
-
The presence of DTCs which begin with "U" indicate some other module is not communicating. The specified procedure will compile all the available information before tests are performed.
Step | Action | Yes | No | ||||
|---|---|---|---|---|---|---|---|
1 | Install a scan tool. Does the scan tool power up? | Go to Step 2 | Go to Scan Tool Does Not Power Up in Data Link Communications | ||||
Does the scan tool communicate with the body control module? | Go to Step 3 | Go to Scan Tool Does Not Communicate with Class 2 Device in Data Link Communications | |||||
3 |
Does the scan tool communicate with the memory seat module? | Go to Step 4 | Go to Scan Tool Does Not Communicate with Keyword Data Line in Data Link Communications | ||||
Does the scan tool display any DTCs? | Go to Step 5 | Go to Symptoms - Doors | |||||
5 | Does the scan tool display any DTCs which begin with a "U"? | Go to Scan Tool Does Not Communicate with Class 2 Device in Data Link Communications | Go to Step 6 | ||||
6 | Does the scan tool display DTC B1552, B1556 or B1558 in the body control module? | Go to Diagnostic Trouble Code (DTC) List in Body Control System | Go to Step 7 | ||||
7 | Does the scan tool display DTC B1973, B1982 or B1983 in the body control module? | Go to Diagnostic Trouble Code (DTC) List in Body Control System | Go to Step 8 | ||||
8 | Does the scan tool display DTCs beginning with a P code in the engine control module? | Go to Diagnostic Trouble Code (DTC) List in Engine Controls | Go to Step 9 | ||||
9 | Does the scan tool display one of the following DTCs in the memory seat module?
| Go to Symptoms - Doors |
