GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 245731  Size: SH
  1. Remove the gear selector boot from the console.
  2. The boot snaps into the console. Remove the boot by gently pulling on on the front end of the boot.

    Important: Do not pry the switch from console as damage to the console trim panel may occur. Dislodge the switch from the console by reaching under the console opening near the gear selector.

  3. Remove the connector from switch.

Installation Procedure


    Object Number: 735866  Size: SH
  1. Install the connector to switch.
  2. Install the switch to console making sure to fully seat.
  3. Install the gear selector boot to console by snapping into place.