GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2001 🢒 Catera 🢒 Body and Accessories 🢒 Instrument Panel, Gauges, and Console 🢒 Instrument Panel Compartment Door Lock Striker Replacement

Removal Procedure

    Object Number: 441140 Size: SH
  1. Open the Instrument Panel (IP) compartment door.
  2. Remove the striker covers.

    3. Object Number: 441141 Size: SH
  3. Remove the bolts and the strikers from IP compartment box.

Installation Procedure

    Object Number: 441141 Size: SH
  1. Install the strikers to IP compartment box secure with bolts.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Adjust the strikers to full forward position, about 1/8 in, for proper engagement with latch mechanism.

    3. Tighten
    Tighten the bolts to 3 N·m(27 lb in).


    Object Number: 441140 Size: SH
  3. Install the striker covers.
  4. Close IP compartment door verify smooth latch engagement. Reposition the strikers until smooth latch engagement is obtained if the IP compartment door requires excessive force to latch.