GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 816676  Size: SH
  1. Place the front bucket seats in the forward position to gain access to the armrest bolts.
  2. Remove the armrest bolts from the center floor console.
  3. Remove the armrest from the center floor console by lifting the armrest in an upward motion.
  4. Disconnect the electrical connectors from the accessories on the cigarette lighter bezel.

  5. Object Number: 816677  Size: SH
  6. With a flat-bladed tool remove the center rear floor outlets from the armrest, if required.

  7. Object Number: 816679  Size: SH
  8. With a flat-bladed tool remove the cigarette lighter bezel from the armrest, if required.

Installation Procedure


    Object Number: 816680  Size: SH
  1. Align the retaining tabs for the cigarette lighter bezel to the armrest, if required.
  2. Press the bezel into the armrest until retaining tabs are fully seated.


    Object Number: 816678  Size: SH
  3. Align the center rear floor outlets to the opening in the armrest, if required.
  4. Press the outlets into the armrest until retaining tabs are fully seated.


    Object Number: 816676  Size: SH
  5. Connect the electrical connectors to the accessories on the cigarette lighter bezel.
  6. Align the armrest to the center floor console.
  7. Position the hooks at the bottom of the cigarette lighter bezel behind the edge of the floor console, while pressing the armrest into place.

  8. Install the armrest bolts to the center floor console.
  9. Tighten
    Tighten the bolts to 3 N·m (27 lb in).

  10. Return the front bucket seats to their original position.