Removal Procedure
- Open the hood.
- Drain the washer solvent from the washer solvent container.
- Disconnect the washer
pump electrical connector.
- Remove the washer pump from the solvent container.
- Remove the washer pump hose from the washer pump.
- Remove the washer pump filter from the solvent container.
- Inspect the washer pump filter. Clean or replace as needed.
Installation Procedure
- Install the washer pump
filter.
- Install the washer pump hose to the washer pump.
- Install the washer pump to the solvent container.
- Connect the washer pump electrical connector.
- Fill the washer solvent container with washer solvent.
- Close the hood.