Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Exterior Lights Schematics | |||
1 | Did you perform the Lighting System Diagnostic System Check? | Go to Step 2 | |
2 |
Do the turn signal lamps and indicators operate properly? | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 |
Are any of the turn signals lamps flashing? | Go to Step 5 | Go to Step 4 |
4 | Are only the turn signal indicators always ON? | Go to Step 9 | Go to Step 6 |
5 | Disconnect the turn signal switch connector. Are any of the turn signals lamps flashing? | Go to Step 8 | Go to Step 7 |
6 | Repair the short to voltage in the supply voltage circuit of the always ON turn signal. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 10 | -- |
7 | Replace the turn signal switch. Refer to Turn Signal Switch Replacement - On Vehicle in Steering Wheel and Column - Tilt. Did you complete the replacement? | Go to Step 10 | -- |
8 | Replace the hazard warning switch. Refer to Hazard Warning Switch Replacement . Did you complete the replacement? | Go to Step 10 | -- |
9 | Replace the IPC. Refer to Instrument Cluster Replacement in Instrument Panel, Gauges and Console. Did you complete the repair? | Go to Step 10 | -- |
10 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 2 |
