Removal Procedure
- Remove the I/P compartment.
Refer to
Instrument Panel Compartment Replacement
in
Instrument Panel, Gages and Console.
- Release the recirculation actuator to blower motor housing retainer
tabs.
- Disconnect the vacuum hose from the recirculation actuator.
- Disconnect the recirculation actuator from the recirculation door
linkage.
Installation Procedure
- Install the recirculation
actuator to the recirculation door linkage.
- Connect the vacuum hose to the recirculation actuator.
- Connect the recirculation actuator to the blower motor
housing.
Ensure the retaining tabs are fully seated.
- Install the I/P compartment. Refer to
Instrument Panel Compartment Replacement
in Instrument Panel, Gages and Console.