Important Preliminary Checks Before Starting
Before using this section, perform the
Diagnostic System Check - Engine Controls
and verify all of the following
conditions:
• | The engine control module (ECM) and the malfunction indicator
lamp (MIL) are operating correctly. |
• | Diagnostic trouble codes (DTCs) are not stored. |
• | Verify the customer concern and locate the correct symptom. Inspect
the items indicated under that symptom. |
• | Several of the symptom procedures ask for a careful visual/physical
check. This step is extremely important, and can lead to correcting a condition
without further checks and can save valuable time. |
• | Verify the proper installation of any of the following non-original
equipment accessories: |
• | Non-factory installed alarm |
- Use the following tables when diagnosing a symptom concern:
- If the condition can not be isolated using the appropriate table,
refer to
Intermittent Conditions
for
further diagnosis.