Removal Procedure
- Partially drain the cooling system. Refer
to
Cooling System Draining and Filling
.
- Remove the radiator inlet hose clamp from the radiator.
- Remove the radiator inlet hose (1) from the radiator.
- Disconnect the auxiliary water pump electrical
connector.
- Remove the auxiliary pump retaining clips.
- Remove the auxiliary pump from the primary fan housing.
- Remove the auxiliary pump hose clamps from the pump.
- Remove the auxiliary pump hoses from the pump.
Installation Procedure
- Install the auxiliary pump
to the hoses.
- Install the auxiliary pump hose clamps.
- Install the auxiliary pump to the primary fan housing.
- Install the auxiliary pump retaining clips.
- Connect the auxiliary pump electrical connector.
- Install the radiator inlet hose (1)
to the radiator.
- Install the radiator inlet hose clamp to the radiator.
- Fill the cooling system. Refer to
Cooling System Draining and Filling
.