This procedure is for servicing the passenger front seat, which has a power height adjuster and a manual horizontal adjuster. For servicing the driver seat, refer to Power Seat Adjuster Mechanism Replacement .

1. Remove the front seat. Refer to Seat Replacement .
2. Remove the outer finish panel from the front seat cushion. Refer to Seat Cushion Outer Trim Panel Replacement .
3. Disconnect the electrical connector from the front seat height adjuster.
4. Remove the seat adjuster bolts.
5. Remove the seat adjuster.



6. Remove the adjuster nut (3) from the front seat height adjuster.



7. Remove the actuator motor bolts from the front seat height adjuster and remove the adjuster actuator motor.
8. Remove the front seat height adjuster.

1. Install the front seat height adjuster.
2. Align the actuator motor to the seat height adjuster shaft when setting the motor in place.
3. Install the adjuster actuator motor, and install the actuator motor bolts to the front seat height adjuster.




Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

4. Install the front seat height adjuster actuator motor nuts and install the adjuster nut (3).

Tighten
Tighten the actuator motor nuts to 4 N·m (35 lb in).

5. Install the seat adjuster.
6. Install the seat adjuster bolts.

Tighten
Tighten the adjuster bolts to 25 N·m (19 lb ft).

7. Connect the electrical connectors to the front seat height adjuster.
8. Install the outer finish panel to the front seat cushion. Refer to Seat Cushion Outer Trim Panel Replacement .
9. Install the front seat. Refer to Seat Replacement .
10. If the vehicle is equipped with memory seats, calibrate the seat. Refer to Memory Seat Calibration .